Configuring Clients

From SEPsesam
Revision as of 18:00, 17 January 2017 by Sta (talk | contribs) (In progress.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Copyright © SEP AG 1999-2024. All rights reserved.

Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.

Docs latest icon.png Welcome to the latest SEP sesam documentation version 4.4.3. For previous documentation version(s), check documentation archive.


Overview

SEP sesam Client is a system that has a SEP sesam Client package installed, is added to the SEP sesam environment as a client and is included for data protection in the backup plans. Clients may be workstations, PCs, virtual machines or file servers with gigabytes of data.

The abbreviation SBC (sesam backup client) is used in a more technical sense for programs, which are executing backup, migration and restore tasks. SBC collects and consolidates the backup data on the client system, and delivers it to Sesam Transfer Protocol Server (STPD – a service that requests the backup data from the SMS Server and manages the data flow between the SEP sesam Server and a client). The SBC module can also be controlled directly without other SEP modules by using SEP sesam CLI.

You configure a new client in the Main selection -> Components -> Topology -> New client.

Procedure

  1. In the Main selection -> Components -> Topology, select HOME and then click New client. Enter the name of the client – this has to be the network host name of the computer. The name has to be resolvable either by DNS or hosts file. If there is a name server (DNS) in the network, SEP sesam automatically selects the TCP/IP address. Otherwise you have to enter it manually in the etc/hosts file.
  2. From the Platform drop-down list, select the relevant platform: Windows, UNIX, VMS or NETWARE.
  3. From the Operating system drop-down list, select the relevant operating system of the client.
  4. From the Access mode drop-down list, select the communication method and access type between the client and the SEP sesam Server. The following access modes are available: CTRL (default), SMSSH (SEP sesam SSH based control communication), PROXY (available vendor-specific protocols are: vSphere (vCenter Server), Citrix Xen Server, NetApp and Novell SMS for NetWare 5.1/6.0/6.5), SSH (Secure Shell), and RSH (Remote Shell). In our example, select CTRL.
  5. In our example, we will leave the following fields empty.
    • The Last message field is intended to display the most recent system status message for the existing client.
    • The Notes field provides an option to comment your configuration.
    • The Interfaces field is meant only for specifying additional interfaces for SEP sesam Server or Remote Device Server (RDS). If there is an additional network for backups available, the resolvable and changed DNS-name of a second network card of the SEP sesam Server can be entered into a new line. If several network cards are available, they need to be known to the DNS otherwise the connection to the SEP sesam Server will fail. The network protocols for data transfer can be set by using the common prefixes ftp:// (default), http:// or https://. For each protocol one interface has to be added in the interfaces box separated by single spaces. One interface for the HTTP protocol http://<hostname>:11000 and one interface for the HTTPS protocol https://<hostname>:11088.
    • Locked for backups is used only in special cases, when you want to exclude a client from backup for technical or other reasons. Checking this option will deactivate your client from all scheduled backups until this option is set.
    • Client is a virtual machine should only be selected if you are adding a virtual machine.


  6. Click Create. A new dialog box appears, asking whether you want to create a new backup job for this client. Click No.
  7. Your new client is displayed in the Topology content pane.

See also

How to check DNS configurationTopology: Client PropertiesClientsStandard Backup Procedure